Pellet boiler Blackstar+ (12-23 kW)
Categories:
Pellet boilers NBE-RTB
BLACKSTAR+ is the latest boiler series from Danish company NBE. The boiler is available in 3 power options, up to 3-12kW, 5-16kW and 7-23kW.
BLACKSTAR+ features:
Very efficient - low pellet and electricity consumption, high efficiency.
Easy to clean - top mechanism needs to be moved once a month.
Built in the best Scandinavian design tradition with a long service life.
- High level of fire protection, multi-level electronic and mechanical protection,
- Cleaning with compressed air is more effective than mechanical cleaning.
- Stainless steel flue gas flow turbolisers are used to increase boiler efficiency.
- Large ash container. Which needs to be cleaned every few months, that is by shaking off 2-3t of pellets
- A conveyor automatically transfers the ash to the ash box located at the front of the boiler. The boiler can use the entire water heat exchanger as the ash has not covered it.
- The vertical heat exchanger ensures that most of the ash falls to the bottom of the boiler and does not accumulate on the boiler walls,
- Mechanical cleaning by means of handles at the top, these move the mechanical heat exchanger cleaners.
- The cleaning process does not create dust in the boiler room.
- The O2 sensor continuously adjusts the air/fuel ratio to ensure optimal combustion.
- Low water content in the boiler for faster warm-up and more economical summer operation.
- Highly efficient motors and pellet feeding process, low electricity consumption.
- Modulation of the boiler output depending on the amount of heat required, 90 possible output variants, output range 10-100%.
- Manufacturer: Denmark
- Manufacturer's warranty from 24 months
Energy efficiency class: A+
Available in stock
Technical parametres | Model | Model | Model |
Boiler model | BS10 | BS16 | BS30 |
Nominal power | 12kW | 16kW | 23kW |
Minimal power | 3kW | 5kW | 7kW |
Efficiency factor for rated power | 95% | 95% | 95% |
Efficiency factor for minimum power | 95,1% | 94,3% | 92,9% |
European standard EN303-5-2012 class | 5 | 5 | 5 |
Width | 506mm | 506mm | 506mm |
Depth | 968mm | 968mm | 968mm |
Height | 1113mm | 1113mm | 1113mm |
Chimney | 130mm | 130mm | 130mm |
Maximum pressure | 4,0 Bar | 4,0 Bar | 4,0 Bar |
Maximum working pressure | 2,5 Bar | 2,5 Bar | 2,5 Bar |
Water volume in boiler | 36 L | 36 L | 36 L |
Weight | 165 kg | 165 kg | 165 kg |
Minimum temperature | 65°C | 65°C | 65°C |
Maximum temperature | 95°C | 95°C | 95°C |
Minimum water flow | 0,50 m3/h | 0,75 m3/h | 1,00 m3/h |
Nominal flue gas temperature | 78°C | 88°C | 101°C |
Minimum flue gas temperature | 52°C | 58°C | 64°C |
Minimum flue draft | 10 Pa | 15 Pa | 25 Pa |
Nominal flue gas emission | 25,0 kg/h | 34,9kg/h | 44,8 kg/h |
Minimum flue gas emission | 11,9 kg/h | 17,8 kg/h | 23,7 kg/h |
Boiler resistance 10K | 9 mbar | 17 mbar | 29 mbar |
Boiler resistance 20K | 3 mbar | 5 mbar | 8 mbar |
Standby power consumption | 4 W | 4 W | 4 W |
Nominal electricity consumption | 39 W | 52 W | 66 W |
Electrical connection | 230V AC 50Hz | 230V AC 50Hz | 230V AC 50Hz |
Noise level | >30dB | >30dB | >30dB |
Pellet size | 6-8mm | 6-8mm | 6-8mm |
Maximum moisture content of pellets | 8% | 8% | 8% |
Energy efficiency class | A+ | A+ | A+ |
No review left