Pool heater Elecro Evolution 2 (1-24 kW)
Categories:
Pool heaters
The Elecro Evolution 2 titanium electric heater, with high efficiency, small dimensions and robust design.
Key product features:
- Several models from 1 kW to 24 kW;
- Single-phase or three-phase connection, depending on the power selected;
- Integrated thermostat and overheat sensor;
- Analog control with 1.2°C temperature differential. A model with digital control display and 0.5°C temperature differential is also available on request;
- Titanium heating element and tube;
- Compact, robust design;
- Floor or wall mounting possible;
- Dimensions (L x W x H): 462mm/592mm x 160mm x 250mm
See below for product technical specification.
Manufacturer: United Kingdom
Available for order
1,649.99 €
Price with VAT
| Power Supply | Single phase or three phase |
|---|---|
| Flow Requirements | Minimum flow: 1-kW to 6-kW, 1m³/h Minimum flow: 9-kW to 24-kW, 4m³/h Maximum flow: 17m³/h |
| Heating Elements | Grade 1 titanium |
| Flow Tube | Grade 1 titanium |
| Control Thermostat | Analogoue: 0>45°C (1.2°C differential) Digital: 0 > 45°C (0.5°C differential) |
| Safety Thermal Cut Out | 60°C (manual reset) |
| Flow Switch | Rhodium tipped reed switch with titanium fulcrum pin |
| Contactor | Siemens 3RT2023 OR 3RT2027 |
| Seals | High temperature special formula EPDM ferrules, TPE end fitting gaskets |
| Water Connection | 1.5” BSP female thread supplied with 1½” / 50mm stepped ABS unions for rigid pipe and 1½” / 1¼” stepped hose tails for flexible pipe |
| Ingress Protection Rating | IP44 |
| Frequency | 50/60 Hz |
| Working Pressure | 4 bar maximum |
| Mounting | Floor or wall mounting |
No review left
