Pump group Solar Simple, DN20, with Wilo ST 15/7 PWM
The single-pipe pump group of the solar system is mounted vertically, with the ball valve and thermometer on top. The pump group is part of the sanitary hot water unit of the solar collector system. The pump group shall be equipped with a flow meter to control the flow of the heat transfer medium.
A check valve is included in the ball valve. The ball valve is used as a shut-off valve which can be locked, for example, to drain the system. Turn the handle 45° clockwise to deactivate the check valve.
Technical data
Rated pressure: 6 bar
Safety valve: 6 bar
Pressure gauge: 0-10 bar
Max. 110°C
Short-term load: 120°C
Min. heat transfer medium temperature: 0°C (water 0,5°)
Opening pressure for check valve: 20mbar
Propylene glycol/water mixing ratio: 25-50%
Flow meter indication range: 0 to 24 l/min
No review left