CENTROMETAL wood burning stove with a gasification chamber Bio-Tec, with lambda sensor, 25-45 kW
Categories:
CENTROMETAL
- The central heating is designed for wood firing (wood moisture content not exceeding 25%);
- The gasification principle ensures complete combustion of the wood, which reduces the frequency of boiler cleaning to a minimum (depending on the quality of the wood and how the boiler is used);
- The design of the boiler, the flue gas solution and the supplementary combustion ensure a high level of efficiency and make its operation very economical;
- Environmentally friendly boiler as it produces very few harmful flue gas emissions;
- Three large doors allow easy cleaning of the boiler and easy charging of the wood;
- The boiler is designed for open and closed type central heating systems, using a suitable storage tank;
- Manufacturer: Croatia;
- Warranty 2 years.
Available for order
BIO-TEC steel hot water boilers (heat output 25-45kW) are designed for wood heating in smaller and medium-sized buildings. The gasification principle ensures complete combustion of the wood. The boiler has a large combustion chamber, which allows the insertion of 550 mm long firewood logs. The combustion period is at least 4 hours to 12 hours per wood load. The boiler shall be equipped with a regulator which controls the operation of the boiler. The boiler should be connected to the central heating system via a 3-way thermovalve and a storage tank.
No review left
