Residential ventilation unit Mitsubishi Electric Lossnay X Mini VL-50SR2 , VL-50S2
This unit is best suited for use in residential homes, offices, educational establishments, etc., where the air becomes stale quickly and the rooms need to be ventilated frequently. In private houses with standard occupancy, it is preferable to install the unit in the warmest part of the house in order to heat the cold incoming outdoor air as efficiently as possible. Thanks to the paper heat exchanger, the room humidity is transferred to the incoming fresh air.
The Lossnay VL-50S2-E mini ventilation unit has two operating modes 51m3/h and 15m3/h.
Lossnay VL-50S2-E - with cord switch.
Lossnay VL-50SR2-E - with wireless remote control.
MAIN ADVANTAGES:
- Recovery efficiency up to 85%
- Noise level from 14dB
- One hole in the wall - 120mm
- Horizontal and vertical installation possible
- Approximate area 20/30m2 for 2 people
- Warranty: 3 years
- Manufacturer: Japan
INCLUDED:
- Pipes for up to 650mm thick wall;
- Outside air intake and exhaust cap;
- Electrical cable with plug, 3m;
P-100P-E d-75 extension pipe, 250mm – 24.56€
P-100PJ-E pipe connector – 24.56€
Mitsubishi Lossnay VL-50 description (RU, PDF)
Models
Mitsubishi Electric air recovery ventilator – Lossnay X Mini
Insufficient ventilation is a problem nowadays. Airtight, poorly constructed buildings have stale air and need to be ventilated frequently. However, the air entering the room in this way is not only fresh but also cold, resulting in higher heating costs during the heating season. The Mitsubishi Electric ventilation unit provides fresh air without opening a window.
The Lossnay VL-50S2-E ventilation unit fits perfectly in all types of buildings and rooms –
apartments, houses, basements and garages. It is particularly suitable for buildings with high radon concentrations, as well as small conference rooms without ventilation.
