Solar hot water preparation kit ECO Solar MPPT 3000 PRO
A simple hot water station that allows you to combine your existing electric boiler with a solar panel system.
This kit includes from four to seven solar panels, a inverter with an integrated MPPT tracker ECO Solar Boost MPPT-3000 PRO and a 25 metre long solar cable with the necessary connection elements. The result is a kit that will use solar energy to power the connected energy consumer - electric boiler, electric warm floor system, etc.
The ECO Solar power inverter is equipped with an LCD display that allows you to read the current data and parameters of the device, such as:
- Voltage level of solar panel systems;
- The amount of electricity produced;
- The amount of power transferred to the energy consumer;
- Total amount of energy produced today, yesterday or since connection.
Although this kit includes solar panels with a total capacity from ~1600W to ~2800W the maximum power that can be connected to the inverter is 3500W.
The picture below shows a simplified connection of the system with two boilers. The first (1) connection between them is the main connection, the second (2) will only connect when the thermostat of the first appliance reaches the set operating temperature. Appliances with electronic control may only be operated from the first connection.
See below for technical data of the inverter:
Parameters / Product name: | SOLAR VOLTAGE CONVERTER ECO Solar Boost MPPT-3000 3.5 kW PRO | |
Input voltage [VDC]: | 120 to 350 (VDC) | |
Output voltage [VAC]: | 120 to 350 (VAC) | |
Maximum power: | 3.5 kW | |
MPPT function: | YES | |
Connection of PV panels: | Serial or series parallel | |
Voltage waveform at the output: | Modified sine | |
VAC Output No. 1: | Priority | |
VAC Output No. 2: | Dependent * | |
Under/over voltage protection: | YES | |
Thermal protection: | YES | |
Overload protection: | YES | |
Working temperature: | -25°C ~ +55°C | |
Efficiency: | >96% | |
Cooling: | Active | |
Power Connector: | MC4 connector | |
230V output socket: | 2 x E (with pin) | |
Case: | Aluminum | |
Degree of protection (IP): | IP21 | |
Dimensions LxWxH [mm]: | 320x272x96 | |
Weight [kg]: | 3.25kg |
No review left